How to Upload Wsjtx Files to Lotw
CQRLOG is an advanced logbook program for Linux and also runs great on the Raspberry PI. A smashing mode to keep your log electronically, incl. upward- download of QSO's with LOTW and EQSL. If ready correctly, it also takes the QSO'southward directly from other programs such as WSJTX.
For this to work, the programs CQRLOG, TQSL and WSJT-X must be installed. Information technology is important that you use the latest version of all programs. For CQRLOG this is 2.4.0, TQSL two.5.vii, WSJT-X 2.2.two at the time of writing this article. The programs tin can exist installed separately or you tin can use the Build a PIScript from Jason, KM4ACK for the Raspberry PI.
How this works I take described in a separate article. See:
https://dl1gkk.com/setup-raspberry-pi-for-ham-radio/
Setup TQSL
Afterward installing TQSL nosotros either utilise for a new certificate or employ an existing ane. It is important that we create a location, nosotros need this in the settings of CQRLOG.
Setup CQRLOG for LOTW and EQSL
Nosotros get-go CQRLOG and click in the menu under File on Preferences. The bones settings are very unproblematic and I recommend commencement to piece of work through all settings from top to bottom in the sidebar on the left and to brand adjustments where necessary. Interesting for us is the setting under LoTW/eQSL support. Here we enter our access data.
In society for the upload and download to piece of work properly, two more important settings for LOTW and EQSL demand to be fabricated. We become back to the card and click on Show QSO list under File. There we go in the menu under QSL, LoTW, Consign and click on Upload QSOs to LoTW web page.
At this betoken information technology is important to connect TQSL correctly. In the line tqsl command line arguments nosotros take to enter the path to the TQSL installation AND, very of import, our location! As nosotros accept divers it before in TQSL.
If there are problems with the login to LOTW and EQSL or the installation please read the corresponding section of my article Setup Raspberry Pi for Ham-Radio. There I accept listed possible errors and the ready.
We become back to the menu and click under File on Show QSO listing. In that location we go in the menu under QSL, eQSL, Export and click on Upload QSO to eQSL.cc. In that location it is important that we have over under QTH Nickname the respective entry as gear up at eQSL.cc.
The aforementioned is valid for the download
Setup CQRLOG for WSJT-Ten
In the menu we click under File on Preferences. There we are at present interested in the settings in fldigi/wsjt interface. The default ADIF port should be 2333 and the default Wsjt port 2237 with the accost 127.0.0.1. Everything else (including the settings for fldigi) is self-explanatory.
Setup WSJT-Ten
Now nosotros start WSJT-10 and click in the menu on File, Settings and and so select the tab Reporting. There nosotros activate the checkboxes at Prompt me to log QSO, Accept UDP asking, Notify on accepted UDP asking, Accepted UDP request restores window and Enable logged contact ADIF circulate.
ENABLE REMOTE LOG
If nosotros now want QSO's from WSJT-Ten (or other programs) to be automatically transferred to CQRLOG, we have to activate this. To practise this, we go back to the File menu in CQRLOG and activate the corresponding entry at that place.
The Remote mode for wsjt enables the all-time possible cooperation of CQRLOG and WSJT-X. CQRLOG expects the QSO data on port 2237, as gear up in WSJT-Ten. Try the Wsjt-x CQ-monitor in CQRLOG, it is groovy.
Setup GridTracker
If y'all want to use WSJT-X, CQRLOG and GridTracker at the same time at that place are two possibilities.
1.) Transfer the QSO data via Remote style for ADIF from WSJT-X to CQRLOG. If activated CQRLOG expects the information on port 2333.
two.) Use Forward UDP Messages from GridTracker. Go to setup and set the port to 2238 there and 2238 in CQRLOG. Then use the Remote mode for wsjt . That is the best way to use WSJT-X, CQRLOG and GridTracker. For it to work, of form, all three programs must be started. Kickoff WSJT-X, then GridTracker, and then CQRLOG.
Have fun, stay healthy
Karl-Heinz Krawczyk, DL1GKK
Source: https://dl1gkk.com/setup-cqrlog-for-wsjt-x-with-lotw-and-eqsl-support/
Belum ada Komentar untuk "How to Upload Wsjtx Files to Lotw"
Posting Komentar